Henco 1010/1020 - Flash Rust / Rust Stain Remover
A safe, low pH organic salt used to replace hydrochloric acid and other traditional acids.
HENCO 1010 Rust Remover is engineered for removing rust and rust stains effectively where time, performance, environment and personal safety are equally important. HENCO 1010 Rust Remover has a very low pH value, which means it lacks the hazardous properties of acids. Unlike almost all other competing products on the market, HENCO 1010 Rust Remover does not contain phosphoric acid.
It is easy to use and is extremely effective in hard to reach areas or where agitation is restricted. No polishing is required - just spray or apply and rinse.
HENCO 1010 Rust Remover has an excellent environmental and aquatic profile. It surpasses the environmental requirements in accordance with MARPOL V Annex III and NPDES and can therefore be used advantageously in the marine environment including on open deck.
- Exceptional performance and cost advantage compared to any other rust remover in the market.
- 3 times more effective than phosphoric acid
- 4 to 10 times more effective than citric and glycolic acid
- Requires less storage space
- Reduce maintenance and labor costs, increase overall value
- Ideal to be used in concentrate or diluted
Use & Application
- Removal of rust from all metal surfaces and all painted surfaces
- Does not harm paint and adds luster in many cases
- For outdoor application
- Can be used for removal of rust stains on wide range of surfaces including plastic, fiberglass, glass, stone and rubber
- Compliant with MARPOL V Annex III
- Compliant with NPDES (National Pollutant Discharge Elimination System)
- Environmentally safe
- Solvent free
- Phosphate and nitrate free
- Does not contain ammonia, alkyl, nonylphenols or bleaches
- Does not contain silicone,teflon (PTFE) or other polymers
- Does not contain corrosive acids
- Does not contain glycol ether
- Readily biodegradable
- Reduces or eliminates VOC
- Low contributor to BOD/COD
- Contains no alkyl phenol ethoxylates
HENCO 1010/4x5: 4x5L in box. Dilute up to 50% in water
HENCO 1010/10 : 10L drum. Dilute up to 50% in water
HENCO 1010/10/50: 10L drum. Ready to use (RTU). Diluted 50% in water
HENCO 1010/207: 207L barrel. Dilute up to 50% in water
HENCO 1010/1000: 100L in IBC. Dilute up to 50% in water
HENCO 1020/10 : 10L drum.
HENCO 1010/207: 207L barrel.
HENCO 1010/1000: 1000L in IBC.
email: [email protected]
telephone: +32 475 42 97 10
or ask a quote in:
For all your enquiries
VMP Vessel Maintenance Products
DR. ROBERT CLARASTRAAT 11
Belgium View on Google Maps