|Article number:||42 600 5735 687 1|
Diamond seals your surfaces and protects them against contamination.
Diamond has been especially developed for the use on transparent/semi-transparent surfaces. Diamond ready-to-use solution can be relied upon for nearly any surface sealing that needs to be done. A clean, grease-free surface suffices. This highly developed and balanced product causes excellent adhesion to the material to be maintained and protected.
The product contains silicium and special water-based maintenance substances.
As a result of the treatment with Diamond the surface becomes even smoother and dirt has no chance of sticking, as it formerly was the case when the surface was rough. The product does not contain alcohol as a carrier substance, nor does it contain flour silanes or chemical silicon oils as solvents. Diamond is non-toxic; silicium adheres electrostatically to surfaces creating a long lasting protection film.
Permanon Diamond demonstrates its outstanding properties in the following areas:
Quick and thorough cleaning made easy
Apply or spray a 5% (1:20) solution onto the surface to be protected. No reaction time is required, also rubbing, buffing, or polishing is not necessary.
Compared to competitor products Permanon is simple in use as it cleans and protects in one step. This gives you brilliant shine and protection. Moreover, follow-up maintenance/cleaning become easier more than 80%.
Concentrate or Ready to use:
Permanon products are highly concentrated and, therefore, must be diluted before use with water. Ready to use products, however, are prefabricated solutions immediately ready for use.
All Permanon products are concentrates and are mixable with regular tap water at 3-5%. This means 5% that is 50 ml must be taken from the concentrate and must be diluted with 1.000 ml water. A mixing rate of 3% equals 500ml which produces about 17 liters ready-to-use solution. Important: the solution freshly prepared with tap water is stable for about three weeks.
In the line of Permanon Diamond we offer the product Ready to use, and, therefore, a prefabricated solution immediately ready for use is available. With 500 ml Ready to use an area of up to 50 sqm can be treated. Important: this application solution has been produced with medicinal water and can therefore be stored for approximately 1 year.